REGLAGES VIDEOS - Nvidia

[injector]
; See the following URL to find out what keycode a key has:
; http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes

;toggle shader keycode
key_toggle = 145 ; 145 = the SCROLL_LOCK key

;make screenshot keycode
key_screenshot = 44 ; 44 = PRINTSCREEN

;reload shader files keycode
key_reload = 19 ; 19 = the PAUSE key


[smaa]
;smaa preset one of {SMAA_PRESET_LOW, SMAA_PRESET_MEDIUM, SMAA_PRESET_HIGH, SMAA_PRESET_ULTRA}
;keep it set to SMAA_PRESET_CUSTOM to allow for custom settings
preset = SMAA_PRESET_CUSTOM

[misc]
;set to 1 to improve steam overlay compatibility
weird_steam_hack = 1

/*-----------------------------------------------------------.
/ Choose effects /
'-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING  1            // [0 or 1] SMAA Anti-aliasing : Smoothens jagged lines.
#define USE_LUMASHARPEN        1            // [0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
#define USE_BLOOM              0            // [0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR                0            // [0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_TECHNICOLOR        1            // [0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_DPX                1            // [0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
#define USE_LIFTGAMMAGAIN      0            // [0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping)
#define USE_TONEMAP            1            // [0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
#define USE_VIBRANCE          1            // [0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_CURVES            1            // [0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA              0            // [0 or 1] Sepia : Sepia tones the image.
#define USE_VIGNETTE          0            // [0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER            0            // [0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_SPLITSCREEN        0            // [0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.


/*-----------------------------------------------------------.
/ SMAA Anti-aliasing settings /
'-----------------------------------------------------------*/

#define SMAA_THRESHOLD        0.05        // [0.05 to 0.20] Edge detection threshold
#define SMAA_MAX_SEARCH_STEPS  60          // [0 to 98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 10          // [0 to 16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING  60          // [0 to 100] Determines the percent of antialiasing to apply to corners.

// -- Advanced SMAA settings --
#define COLOR_EDGE_DETECTION  1            // [0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster)
#define SMAA_DIRECTX9_LINEAR_BLEND 0            // [0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.


/*-----------------------------------------------------------.
/ LumaSharpen settings /
'-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength        1.0          // [0.10 to 3.00] Strength of the sharpening
#define sharp_clamp            0.035        // [0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern                2            // [1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
#define offset_bias            1.0          // [0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
// I designed the pattern for offset_bias 1.0, but feel free to experiment.


// -- Debug sharpening settings --
#define show_sharpen          0            // [0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)


/*-----------------------------------------------------------.
/ Bloom settings /
'-----------------------------------------------------------*/
#define BloomThreshold        23.25        // [0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
#define BloomPower            1.5          // [0.0000 to 8.0000] Strength of the bloom
#define BloomWidth            0.0142      // [0.0000 to 1.0000] Width of the bloom


/*-----------------------------------------------------------.
/ HDR settings /
'-----------------------------------------------------------*/
#define HDRPower              1.30        // [0.0 to 8.0] Strangely lowering this makes the image brighter
#define radius2                0.87        // [0.0 to 8.0] Raising this seems to make the effect stronger and also brighter


/*-----------------------------------------------------------.
/ TECHNICOLOR settings /
'-----------------------------------------------------------*/
#define TechniAmount          0.20        // [0.0 to 1.0]
#define TechniPower            10.0        // [0.0 to 8.0]
#define redNegativeAmount      0.80        // [0.0 to 1.0]
#define greenNegativeAmount    1.00        // [0.0 to 1.0]
#define blueNegativeAmount    0.50        // [0.0 to 1.0]


/*-----------------------------------------------------------.
/ Cineon DPX settings /
'-----------------------------------------------------------*/
#define Red                    8.0          // [1.0 to 15.0]
#define Green                  8.0          // [1.0 to 15.0]
#define Blue                  8.0          // [1.0 to 15.0]

#define ColorGamma            2.5          // [0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
#define DPXSaturation          3.0          // [0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

#define RedC                  0.36        // [0.6 to 0.2]
#define GreenC                0.36        // [0.6 to 0.2]
#define BlueC                  0.34        // [0.6 to 0.2]

#define Blend                  0.2          // [0.0 to 0.1] How strong the effect should be.


/*-----------------------------------------------------------.
/ Lift Gamma Gain settings /
'-----------------------------------------------------------*/
#define RGB_Lift              float3(0.400000, 0.400000, 0.400000) // [0.000 to 2.000] Adjust shadows for Red, Green and Blue
#define RGB_Gamma              float3(1.200, 1.200, 1.200) // [0.000 to 2.000] Adjust midtones for Red, Green and Blue
#define RGB_Gain              float3(0.950, 0.950, 0.950) // [0.000 to 2.000] Adjust highlights for Red, Green and Blue


/*-----------------------------------------------------------.
/ Tonemap settings /
'-----------------------------------------------------------*/
#define Gamma                  1.15        // [0.00 to 2.00] Adjust midtones

#define Exposure              0.01        // [-1.00 to 1.00] Adjust exposure

#define Saturation            0.000        // [-1.00 to 1.00] Adjust saturation

#define Bleach                0.25        // [0.00 to 1.00] Brightens the shadows and fades the colors

#define Defog                  0.055        // [0.00 to 1.00] How much of the color tint to remove
#define FogColor              float3(0.60, 0.30, 0.40) // [0.00 to 1.00, 0.00 to 1.00, 0.00 to 1.00] What color to remove - default is blue


/*-----------------------------------------------------------.
/ Vibrance settings /
'-----------------------------------------------------------*/
#define Vibrance              -0.10        // [-1.0 to 1.0] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.


/*-----------------------------------------------------------.
/ Curves settings /
'-----------------------------------------------------------*/
#define Curves_contrast        0.60        // [-1.0 to 1.0] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula        7            // [1|2|3|4|5|6|7] The constrast s-curve you want to use.


/*-----------------------------------------------------------.
/ Sepia settings /
'-----------------------------------------------------------*/
#define ColorTone              float3(1.40, 1.10, 0.90) // [0.00 to 1.00, 0.00 to 1.00, 0.00 to 1.00] What color to tint the image
#define GreyPower              0.11        // [0.0 to 1.0] How much desaturate the image before tinting it
#define SepiaPower            0.58        // [0.0 to 1.0] How much to tint the image



/*-----------------------------------------------------------.
/ Vignette settings /
'-----------------------------------------------------------*/
#define VignetteRadius        1.00        // [-1.00 to 3.00] lower values = stronger radial effect from center
#define VignetteAmount        -1.00        // [-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
#define VignetteSlope          8            // [1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter        float2(0.500, 0.500) // [0.00 to 1.00] Center of effect.


/*-----------------------------------------------------------.
/ Dither settings /
'-----------------------------------------------------------*/
//No settings yet, beyond switching it on or off in the top section.

//Note that the checkerboard pattern used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.


/*-----------------------------------------------------------.
/ Splitscreen settings /
'-----------------------------------------------------------*/
#define splitscreen_mode      3            // [1|2|3|4|5] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split