OBT~Miguel21®
Messages : 2140
Date d'inscription : 04/06/2008
 | Sujet: PATCH - v.1.10.20332 Release candidate 2  Ven 12 Oct - 17:57 | |
| http://forum.1cpublishing.eu/showthread.php?t=34902Si tout ce qui est annoncé est vrai (et si je comprend un peu l'Angloi) ça va donner, il ne manque plus que le rétro - Citation :
- Posté par Luthier
Patch download mirrors:
INTL:
http://www.filesend.net/download.php...edc9eb0e1899e0
RU:
http://speedy.sh/T6zPS/IL2COD-20332-ru.rar
(344 Mb)
Please help us with mirrors!
Please note that this version is incompatible with previous versions when playing online.
Please download the file and extract the archives to your steam game directory, which is usually
C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover
This patch contains the entire contents of RC1 + hotfix, so its readme applies as well.
Readme for the latest version:
AIRCRAFT
- RAF engines no longer stop at idle;
- Made corrections to rough running on non warmed Merlin engines. Engines still require to be warmed up and won’t work properly when too cold.
Please note that engines still start with oil and water at colder temperatures. With Hurricanes, please keep throttle back until the temperature is at least 45 degrees C (takes about 50 seconds after start at external temperature of +20 C);
- Corrected Hurricane boost indications. Previously shown +5.5Lbs Boost with full throttle, now properly displays +6.25 from Ground level all the way up to Full Throttle height;
- Fixed issue that occasionally caused planes with landing gear raised to still show it in the down position;
- Corrected Hurricane weights. Please note that in-game weights are slightly different from those used in RAF documents, especially what the game calls empty weight. Our fuel is also slightly heavier. The weights in-game have been further finetuned to match desired performance;
- Corrected Hurricane 1 100-Oct Mixture lever operation. It no longer requires Mixture lever Forward to maintain smooth engine operation with Boost Cut out activated. Mixture Lever should now be properly held Back for Boost Cut Out operation;
- Corrected SPIT MK IA 100-Oct Mixture Lever operation;
- Corrected rough running on Merlin engines above 11,000 ft;
- Corrected Bf.109E-4 auto prop pitch operations. Max RPM target should now be the proper 2400 RPM;
- Corrected control surface angles on the Hurricanes according to historical documents;
- Added drag to canopies opened in-flight on all aircraft;
- Greatly increased the effects of punctured radiators on engine temperature to make the effect more noticeable;
- Corrected radiator drag on the Bf.109s;
- Corrected weights on Fiat G.50;
- Corrected boost operations on British engines;
- Fixed the inaudible hit sounds online bug;
- Made corrections to Su-26 flight model. The plane is now less helicopter-like on take-off;
- Corrected skid ball on the Su-26 to work in the proper direction;
- Corrected the RPM indicator operation on the Su-26;
- Fixed Su-26 landing gear position when on the ground;
- Fixed the issue that occasionally caused never-ending Stuka horns online;
- Corrected external exhaust lights that could erroneously be seen from the cockpit;
- Corrected issue with the display of vapor trails;
- Restored AOA-based tip streamers.
GRAPHICS & MISC
- Added racing pylon models for air races. We’d like to thank Rasim Mullahmetov for supplying the model!
NOTE: Hitting a pylon will not currently damage the aircraft. However it will create a special OnStationaryKilled event that servers or mission designers can use to track mission points;
- Corrected Z_Offset parameter in online missions. Mission objects will now properly offset based on mission designer’s input;
- Corrected radio beacon code online;
- Fixed rare crashes connected to improper Road or LinearObjectManager usage in custom missions.
Note about NVidia SLI:
The patch must go through official NVidia accreditation for SLI support to be officially enabled in drivers. The patch will only go through the process once it’s officially released on steam.
If you wish to bypass this process and manually enable SLI support, please go through the following steps:
1) Download a profiler utility, for example
http://nvworld.ru/utilities/sliprofiletool/
2) Export SLI profiles to a file
3) Manually edit the file by adding the following lines
Code:
Profile "Il2: Cliffs of Dover"
ShowOn GeForce
ProfileType Application
Executable " il-2 sturmovik cliffs of dover/Launcher.exe"
Setting ID_0x00a06946 = 0x000240f5
Setting ID_0x1033cec1 = 0x00000001
Setting ID_0x1033cec2 = 0x00000002
Setting ID_0x1033dcd2 = 0x00000004
Setting ID_0x1033dcd3 = 0x00000004
Setting ID_0x1095def8 = 0x00000004
EndProfile
4) Re-import the file
5) Fly!
IMPORTANT: Please note that
Executable " il-2 sturmovik cliffs of dover/Launcher.exe"
must point to the actual location of the game’s executable. If you have installed the game to a different folder, please edit the line accordingly. | |
|
OBT~Vil_coyote
n°22
Messages : 1830
Date d'inscription : 02/06/2008
Age : 51
Localisation : Dpt 49
| | Sujet: Re: PATCH - v.1.10.20332 Release candidate 2 Dim 14 Oct - 15:24 | |
| | |
|
OBT~Vil_coyote
n°22
Messages : 1830
Date d'inscription : 02/06/2008
Age : 51
Localisation : Dpt 49
| | Sujet: Re: PATCH - v.1.10.20332 Release candidate 2 Lun 15 Oct - 20:42 | |
| | |
|
Contenu sponsorisé
| | Sujet: Re: PATCH - v.1.10.20332 Release candidate 2 | |
| |
|
Calendrier